AXIS
アクシス株式会社 会社概要
製品紹介

製品紹介

倉庫

リモートセンシング

サテライトトラッキング

サテライトチェックアウト

PCI/IFボード

アナログ/デバイス
その他
TOPICS
タイトル

画像
画像
table-top
-- Summary --
BOB (referred to as "this equipment" after this) is to be connected to the cables between the equipment. When it is connected, the each cable line can be used for monitoring via its ports.
As the each line has a switch, the signals on the line can be disconnected. The monitor ports are pin-jack type and placed next to the switches of the each line; the lines can be switched by connecting/disconnecting the switch.
table-bottom
 line
Specifications
1) BOB (Pin types: 50, 25, and 15)
-Connection type
Input connector: D-sub
DD-50P
DB-25P
DA-15P
Output connector: D-sub
DD-50S
DB-25S
DA-15S
*Connector of the each pin corresponds one-on-one.
*The connector is screw lock type
-Line disconnecting switch
-When 50 lines used (DD-50P, when S) Switches Corresponds to 50 lines
(The numbers of the switches correspond to the corrector-pin switches in numerical order )
-When 25 lines used (DB-25P, when S) Switches Corresponds to 25 lines
(The numbers of the switches correspond to the corrector-pin switches in numerical order )
-When 15 lines used (DA-15P, when S) Switches Corresponds to 15 lines
(The numbers of the switches correspond to the corrector-pin switches in numerical order )
*50 switches are mounted. The switches that are not used for connectors are unconnected.
-Monitor ports
Mounted next to the lines for the switches.
The maximum is 50 lines and 100 monitor ports.
-Monitor port: TJ-1 (SATO Parts)
-Pin jack: TJ-2 (SATO Parts): Optional